Edge-Core ES3628C Guide d'installation télécharger pdf (Page 10)

User Guide

6. Secure the new module: Secure the new module in place by screwing the

attached screws clockwise into the switch’s chassis. Tighten them enough to

secure the module, but not so tight as to prevent them from being unscrewed

by hand.

7. Connect the network cable to the module: Connect fiber cable to the port on

the newly installed module. See “Maximum Cable Length” on page 5 in this

guide for further information.

8. Power on the switch: Reconnect the previously removed power sources to the

switch. Check the LED indicators for the fiber ports on the module’s bracket to

ensure that they are operating correctly. Refer to “Gigabit Port LEDs” on page 1

for a description of the LED indications. If the module does not respond, see

“Troubleshooting” on page 5.

Refer to the following manuals for the base unit for further details on using this module:

Quick Installation Guide- connection options and network applications

Management Guide - configuration options

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Edge-Core ES3628C Guide d'installation Page 10