Edge-Core ECS3510-26T EUK Guide d'installation Page 40

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 80
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 39
C
HAPTER
3
| Installing the Switch
Mounting
– 40 –
MOUNTING
The switch can be mounted in a standard 19-inch equipment rack, on a desktop
or shelf, or on a wall. Mounting instructions for each type of site follow.
RACK MOUNTING
Before rack mounting the switch, pay particular attention to the following
factors:
Temperature: Since the temperature within a rack assembly may be higher
than the ambient room temperature, check that the rack-environment
temperature is within the specified operating temperature range. (See
page 65.)
Mechanical Loading: Do not place any equipment on top of a rack-mounted
unit.
Circuit Overloading: Be sure that the supply circuit to the rack assembly is
not overloaded.
Grounding: Rack-mounted equipment should be properly grounded.
Particular attention should be given to supply connections other than direct
connections to the mains.
Figure 11: Grounding
Terminate the wire at an
earthed grounding point.
Attach an insulated grounding
wire, with a metal screw, to
the marked grounding point.
1.
2.
Vue de la page 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 79 80

Commentaires sur ces manuels

Pas de commentaire