Edge-Core WA6202AM EU Guide de l'utilisateur télécharger pdf (Page 193)

SNMP Commands

7-41

snmp-server community

This command defines the community access string for the Simple Network

Management Protocol. Use the no form to remove the specified community string.

Syntax

snmp-server community string [ro | rw]

no snmp-server community string

• string - Community string that acts like a password and permits access to

the SNMP protocol. (Maximum length: 23 characters, case sensitive)

• ro - Specifies read-only access. Authorized management stations are only

able to retrieve MIB objects.

• rw - Specifies read/write access. Authorized management stations are able

to both retrieve and modify MIB objects.

Default Setting

• public - Read-only access. Authorized management stations are only able

to retrieve MIB objects.

• private - Read/write access. Authorized management stations are able to

both retrieve and modify MIB objects.

Command Mode

Global Configuration

Command Usage

If you enter a community string without the ro or rw option, the default is read

only.

Example

snmp-server contact

This command sets the system contact string. Use the no form to remove the

system contact information.

Syntax

snmp-server contact string

no snmp-server contact

string - String that describes the system contact. (Maximum length: 255

characters)

Default Setting

None

Enterprise AP(config)#snmp-server community alpha rw

Enterprise AP(config)#

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 331 332

Pas de commentaire

Edge-Core WA6202AM EU Guide de l'utilisateur Page 193