Edge-Core WA6202AM EU Guide de l'utilisateur télécharger pdf (Page 229)

WDS Bridge Commands

7-77

bridge mode

This command selects between Master and Slave mode.

Syntax

bridge mode <master | slave>

• master - Operates as a master enabling up to five slave links.

• slave - Operates as a slave with only one link to the master.

Default Setting

WA6202A: Slave

WA6202AM: Master

Command Mode

Interface Configuration (Wireless)

Example

bridge role (WDS)

This command selects the bridge operation mode for the radio interface.

Syntax

bridge role <ap | repeater | bridge | root-bridge>

• ap - Operates only as an access point for wireless clients.

• repeater - Operates as a wireless repeater, extending the range for remote

wireless clients and connecting them to the root bridge. The “Parent” link to

the root bridge must be configured. In this mode, traffic is not forwarded to

the Ethernet port from the radio interface.

• bridge - Operates as a bridge to other access points also in bridge mode.

• root-bridge - Operates as the root bridge in the wireless bridge network.

Default Setting

Command Mode

Interface Configuration (Wireless)

Command Usage

• When the bridge role is set to “repeater,” the “Parent” link to the root bridge

must be configured (see “bridge-link parent” on page 77-78). When the

access point is operating in this mode, traffic is not forwarded to the

Ethernet port from the radio interface.

• Up to four WDS bridge links (MAC addresses) per radio interface can be

specified for each unit in the wireless bridge network. One unit only must be

Enterprise AP(if-wireless a)#bridge mode master

Enterprise AP(if-wireless a)#

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 331 332

Pas de commentaire

Edge-Core WA6202AM EU Guide de l'utilisateur Page 229