Edge-Core WA6202AM EU Guide de l'utilisateur télécharger pdf (Page 249)

Wireless Interface Commands

7-97

Command Usage

• The normal 802.11a wireless operation mode provides connections up to

54 Mbps. Turbo Mode is an enhanced mode (not regulated in IEEE

802.11a) that provides a higher data rate of up to 108 Mbps. Enabling Turbo

Mode allows the access point to provide connections up to 108 Mbps.

• In normal mode, the access point provides a channel bandwidth of 20 MHz,

and supports the maximum number of channels permitted by local

regulations (e.g., 11 channels for the United States). In Turbo Mode, the

channel bandwidth is increased to 40 MHz to support the increased data

rate. However, this reduces the number of channels supported (e.g., 5

channels for the United States).

Example

multicast-data-rate

This command configures the maximum data rate at which the access point

transmits multicast and management packets (excluding beacon packets) on the

wireless interface.

Syntax

multicast-data-rate <speed>

speed - Maximum transmit speed allowed for multicast data.

(Options for 802.11a: 6, 12, 24 Mbps)

(Options for 802.11b/g; 1, 2, 5.5, 11 Mbps)

Default Setting

1 Mbps for 802.11b/g

6 Mbps for 802.11a

Command Mode

Interface Configuration (Wireless)

Example

Enterprise AP(if-wireless a)#turbo

Enterprise AP(if-wireless a)#

Enterprise AP(if-wireless g)#multicast-data-rate 5.5

Enterprise AP(if-wireless g)#

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 331 332

Pas de commentaire

Edge-Core WA6202AM EU Guide de l'utilisateur Page 249